RAM 2500 Truck 4WD L6-5.9L DSL Turbo VIN 6 (1999)
Brake Shoe Position In Caliper
4. Install outboard brake shoe in caliper. Be sure spring ends are seated in dimples in caliper.
Caliper Installation
5. Install caliper over rotor and into steering knuckle mounting arms. Be sure caliper is seated flush on mounting arm surfaces as shown.
6. Start caliper mounting bolts by hand to avoid cross threading. Then tighten mounting bolts to 51 Nm (38 ft. lbs.) torque.
7. Install wheel and tire assemblies.
8. Pump brake pedal to seat the brake shoes.
9. Verify firm pedal before moving vehicle.