RAM 2500 Truck 4WD L6-5.9L DSL Turbo VIN 6 (1999)
Valve: Service and Repair
VALVES, SPRINGS, AND SEALS (OFF VEHICLE)
REMOVAL
1. Remove cylinder head. Refer to Cylinder Head, Service and Repair, Removal and Installation.
2. Support cylinder head on stands, or install head bolts upside down (through combustion surface side) to protect injector tips from damage from
work bench.
Injector Clamp Removal/Installation
3. Remove the injector clamp from the cylinder(s) to be serviced. Do not remove the bolt shown.
Spring Compressor Mounting Base-Part Of Tool 8319
4. Install the valve spring compressor mounting base (special tool 8319) as shown. Reinstall the injector clamp bolt finger tight.