RAM 2500 Truck 4WD L6-5.9L DSL Turbo VIN 6 (1999)
Oil Pressure Regulator Valve: Testing and Inspection
CLEANING
1. Clean the regulator spring and plunger with a suitable solvent and blow dry with compressed air. If the plunger bore requires cleaning, it is
necessary to remove the oil filter head to avoid getting debris into the engine.
INSPECTION
Inspect the plunger and plunger bore for cracks and excessive wear. Polished surfaces are acceptable. Verify that the plunger moves freely in the bore.
Oil Pressure Regulator Spring Check
Check the spring for height and load limitations. Replace the spring if out of limits shown in the figure.
Inspect the plug O-ring for cracks or brittleness, and replace as necessary.
