RAM 2500 Truck 4WD L6-5.9L DSL Turbo VIN 6 (1999)
Pump Assembly
10. Remove the remaining three power steering pump to adapter mounting nuts.
Vacuum Pump Adapter
11. Gently, remove the steering pump from the adapter. Use caution not to damage the oil seal in the adapter body.
INSTALLATION
NOTE: Make sure the two pump spacers are present before assembling power steering pump to adapter.
1. Align the steering pump drive dog with the slot in the vacuum pump drive assembly, slide the steering pump into place on the adapter. Use care
not to damage the oil seal in the adapter body.
2. Install the three steering pump to adapter nuts, do not install the lower inboard mounting nut at this time. Tighten nuts to 24 Nm (18 ft.lbs.).