RAM 2500 Truck 4WD L6-5.9L DSL Turbo VIN 6 (1999)
Backup Lamp Switch: Service and Repair
Removal
1. Disengage wiring connector from the backup lamp switch.
Backup Lamp Switch
2. Remove the backup lamp switch from the extension/adapter housing. Be sure to remove the switch gasket from the housing.
Installation
1. Remove any remaining gasket material from the extension/adapter housing.
2. Install switch and gasket into the extension/ adapter housing.
3. 1brque the backup lamp switch to 20 - 35 Nm (20 - 28 ft. lbs.).
