RAM 2500 Truck 4WD L6-5.9L DSL Turbo VIN 6 (1999)
Fig. 71
7. Turn upper housing around and remove limit valve and shift valve covers (Fig. 71).
8. Remove limit valve housing. Then remove retainer, spring, limit valve, and 2-3 throttle plug from limit valve housing.
9. Remove 1-2 shift control valve and spring.
10. Remove 1-2 shift valve and spring.
11. Remove 2-3 shift valve and spring from valve body.
12. Remove pressure plug cover.
13. Remove line pressure plug, sleeve, throttle pressure plug and spring.
Valve Body Lower Housing
1. Remove timing valve cover.
2. Remove 3-4 timing valve and spring.
3. Remove 3-4 quick fill valve, spring and plug.
4. Remove 3-4 shift valve and spring.
