RAM 2500 Truck 4WD L6-6.7L DSL Turbo VIN A (2007)
2. Remove instrument panel top cover.
3. Remove speaker mounting fasteners.
4. Disconnect electrical harness connector and remove speaker.
INSTRUMENT PANEL END SPEAKER
1. Disconnect and isolate the battery negative cable.
2. Remove instrument panel top cover.
3. Remove speaker mounting fasteners.
4. Disconnect electrical harness connector and remove speaker.
REAR CAB SIDE SPEAKER
1. Disconnect and isolate the battery negative cable.
2. Remove B-pillar lower trim.
3. Remove speaker mounting fasteners.
4. Disconnect electrical harness connector and remove speaker.
REAR DOOR SPEAKER