RAM 2500 Truck 4WD V8-5.7L VIN D (2005)
10. Remove the bottom anti-rattle springs (2) from the caliper adapter (1).
INSTALLATION
1. Bottom pistons in caliper bore with C-clamp. Place an old brake shoe between a C-clamp and caliper piston.
2. Clean caliper mounting adapter (1) and anti-rattle springs (2).
3. Lubricate anti-rattle springs with Mopar(R) brake grease.
NOTE: Anti-rattle springs are not interchangeable.
4. Install new top anti-rattle springs (2).
5. Install new bottom anti-rattle springs (1).