RAM 2500 Truck 4WD V8-5.7L VIN D (2005)
Rocker Arm Assembly: Service and Repair
ROCKER ARM
REMOVAL
1. Remove cylinder head cover.
2. Install pushrod retaining plate (1) special tool 9070.
3. Loosen the rocker shafts using the sequence provided.
CAUTION: The rocker shaft assemblies are not interchangeable between intake and exhaust. The intake rocker arms are marked with an "I".
4. Remove the rocker shafts. Note location for reassembly.
CAUTION: The longer push rods are for the exhaust side, and the shorter push rods are for intake side.