RAM 2500 Truck 4WD V8-5.7L VIN D (2005)
4. Reinstall the oil pump pickup tube with new O-ring. Tighten tube to pump fasteners to 28 Nm (250 inch lbs.).
NOTE: The double ended oil pan studs must be installed in the same location that they were removed from.
5. Position the oil pan and install the mounting bolts and studs. Tighten the mounting bolts to 12 Nm (105 inch lbs.), using the sequence above.
6. Lower the transmission onto the crossmember. Install nuts, and tighten.
7. Lower the engine into mounts using special tool #8534.
8. For 2WD vehicles, Install both the left and right side engine mount through bolts. Tighten the nuts to 68 Nm (50 ft. lbs.).
9. For 4WD vehicles, Install both the left and right side engine mount bracket to mount bolts. Tighten the nuts to 68 Nm (50 ft. lbs.).
10. Remove special tool #8534.
11. Install the structural dust cover (1).
12. Install the front crossmember.