RAM 2500 Truck 4WD V8-5.7L VIN D (2005)
1. Remove the HVAC housing assembly and place it on a workbench.
2. Disconnect the HVAC wire harness connectors from the mode door actuators (1), blend door actuators (2) and the recirculation door actuator (3).
3. Remove the screws that secure the mode door actuators and the blend door actuators to the HVAC housing (5) and remove the actuators.
4. Remove the screws that secure the recirculation door actuator to the air inlet housing (4) and remove the actuator.
5. Disconnect the wire harness connectors (1 and 3) from the blower motor resistor (7) and the blower motor (2).
6. Remove the screws (4) that secure the blower motor to the HVAC housing (5) and remove the blower motor.
7. Remove the screws (6) that secure the blower motor resistor to the HVAC housing and remove the resistor.