RAM 2500 Truck 4WD V8-5.7L VIN D (2005)
NO: Go To 7
7. INSTRUMENT CLUSTER
Turn the ignition off.
Disconnect the Anti-lock Brakes Module harness connector.
Connect a jumper wire between the (B25) Brake Fluid Level Sensor Sense circuit and ground.
With the DRBIII(R) in Inputs/Outputs, read the Brake Fluid Level Sensor state.
Q: Does the DRBIII(R) display "Closed"?
YES: Replace and configure the Instrument Cluster. Perform BODY VERIFICATION TEST - VER 1. See: Testing and Inspection/Diagnostic
Trouble Code Tests and Associated Procedures/Verification Tests/Body Verification Test
NO: Replace the Anti-lock Brakes Module. Perform BODY VERIFICATION TEST - VER 1. See: Testing and Inspection/Diagnostic Trouble
Code Tests and Associated Procedures/Verification Tests/Body Verification Test
Fuel Gauge Inaccurate
FUEL GAUGE INACCURATE
