RAM 2500 Truck 4WD V8-5.7L VIN D (2005)
5. The push-button is attached to two internal latches (1).To disconnect, press on push-button with your thumb and unlatch fitting from fuel line.
Special tools are not required for disconnection. DO NOT ATTEMPT TO PRY OR PULL UP ON PUSH-BUTTON. LATCHES WILL BE
BROKEN.
6. Perform fuel pressure release procedure. Refer to Fuel Pressure Release Procedure.
7. Disconnect negative battery cable from battery.
8. Clean fitting of any foreign material before disassembly.
9. 2-Button Type Fitting: This type of fitting (1) is equipped with a push-button located on each side of quick-connect fitting (2). Press on both
buttons simultaneously for removal. Special tools are not required for disconnection.
