RAM 2500 Truck 4WD V8-5.7L VIN D (2005)
Seals and Gaskets: Service and Repair
Seal-Extension Housing
SEAL-EXTENSION HOUSING
REMOVAL
1. Remove the propeller shaft.
2. Remove extension housing (1) seal (2) with Remover C-3985-B.
3. On heavy duty 4X2 vehicles, remove extension housing seal with a seal pick.
4. On light duty transmissions, remove the extension housing bushing with Remover 6957.
5. On heavy duty transmissions, remove the extension housing bushing with Remover 8155.
INSTALLATION
1. Install extension housing (3) bushing with Handle C-4171(1) and LD transmission - Installer 6951(2) or HD transmission - Installer 8161(2).
2. Install housing seal with Handle C-4171(1) and LD transmission - Installer C-3972-A or HD transmission Installer 8154.
3. Install propeller shaft.
4. Check and fill transmission.
