RAM 2500 Van V8-318 5.2L VIN T Magnum CNG SFI (1997)
Antenna: Service and Repair
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Open the glove box door and remove the glove box bin.
3. Remove the right spot cooler duct. Refer to Heating and Air Conditioning for the procedures.
4. Reach through the glove box opening and unplug the antenna coaxial cable connector from the radio.
Antenna Cable Remove/Install
5. Push the antenna coaxial cable and grommet through the dash panel.
Antenna Mast Remove/Install - Typical
6. Remove the antenna mast.
7. Reach under the right front fender from the engine compartment and grasp the antenna body.