RAM 2500 Van V8-318 5.2L VIN T Magnum CNG SFI (1997)
Power Door Lock Switch: Testing and Inspection
1. Remove the switch from the trim panel as described. Carefully separate the wire harness connector from the switch body.
2. Check for battery voltage at the fused B(+) circuit cavity of the switch wire harness connector. If OK, go to Step 3. If not OK, repair the open
circuit to the fuseblock module as required.
Power Lock Switch Continuity
3. Test the switch continuity. See the Power Lock Switch Continuity chart to determine if the continuity is correct in the Off, Lock and Unlock switch
positions. If OK, repair the open circuit to the power lock and remote keyless entry module as required. If not OK, replace the faulty switch.