RAM 2500 Van V8-360 5.9L Magnum (1995)
Canister Purge Solenoid: Testing and Inspection
-
In the RUN or START position, the ignition switch connects circuit A1 from the fuse block and circuit A21. Circuit A1 connects to battery voltage
and is protected by fuse 7 in the Power Distribution Center (PDC).
-
Circuit A21 splices to supply battery voltage to the EGR solenoid, Torque Converter Clutch (TCC) solenoid, overdrive solenoid, data link
connector and provides an input to the PCM.