RAM 2500 Van V8-5.2L Prop VIN 2 (2000)
Brake Light Bulb: Service and Repair
Tail/Brake/Turn Signal/Sidemarker/Back-Up Lamp Bulb Replacement
REMOVAL
1. Remove the screws attaching the lamp to the vehicle.
Bulb Socket Removal
2. Rotate the bulb socket 1/4 turn counter-clockwise to remove it from the housing.
3. Pull the bulb straight out of the socket to remove it.
INSTALLATION
1. Press bulb into socket and position socket in housing.
2. Rotate the bulb socket 1/4 turn clockwise to install in the housing.
3. Position the lamp on the vehicle and install screws.
