RAM 2500 Van V8-5.2L VIN Y (1998)
Antenna Cap Nut Remove/Install - Typical
10. Remove the antenna cap nut and adapter using an antenna nut wrench (Special Tool C-4816).
Antenna Mounting
11. Lower the antenna body and cable assembly through the top of the fender far enough to access the antenna body by reaching through the opening
in the right end of the cowl plenum.
12. Remove the antenna body and cable from the cowl plenum.
13. Reverse the removal procedures to install. Tighten the antenna cap nut to 7.3 N.m (65 in. lbs.). Tighten the antenna mast to 3.3 N.m (30 in. lbs.).
