RAM 2500 Van V8-5.9L VIN Z LDC (2000)
Front Door Striker: Service and Repair
LATCH STRIKER
REMOVAL
1. Using a wax crayon or equivalent, mark position of striker on B-pillar.
Fig. 11
2. Remove screws attaching striker to B-pillar (Fig. 11).
3. Separate striker and spacer from vehicle.
INSTALLATION
1. Position spacer and striker on the B-pillar.
2. Install screws attaching striker to B-pillar (Fig. 11). Tighten screws to 28 N.m (20 ft. lbs.) torque.
