RAM 2500 Van V8-5.9L VIN Z LDC (2000)
Rear Door Panel: Service and Repair
Rear Cargo Door
TRIM PANEL
REMOVAL
1. Open the cargo door.
2. Remove the retaining screw and the door inside handle.
Fig. 1
3. Using a trim stick C-4755 or equivalent, remove the door inside handle bezel halves (Fig. 1):
-
Insert trim sticks under the upper bezel.
-
Use a plastic mallet and a blunt tool and gently tap on the upper half until it is released from the trim panel.
-
Remove the upper bezel from the trim panel.
-
Tap the lower bezel half upward and remove it from the trim panel.
