RAM 2500 Van V8-59L VIN Z LDC (2000) Front Cross-Member Service and Repair
Front Cross-Member: Service and Repair
FRONT CROSSMEMBER
REMOVAL
1. Remove the front springs.
2. Remove sway bar.
3. Disconnect outer tie rod ends.
4. Remove brake rotors.
5. Loosen brake rotor dust shield/backing plates and anti-lock sensor (if equipped).
Fig. 5
6. Install engine support fixture, Tool C-3487-A with frame hooks or a suitable substitute to support engine (Fig. 5).
7. Remove lower engine-mount nuts.
Fig. 6
