RAM 2500 Van V8-5.9L VIN Z LDC (2000)
Oil Pan: Service and Repair
REMOVAL
(1) Disconnect battery negative cable.
(2) Remove engine oil dipstick.
(3) Remove air cleaner inlet duct.
(4) Unbolt the engine controller from the cowl and secure out of the way. DO NOT DISCONNECT.
(5) Remove upper cooling fan shroud fasteners.
(6) Remove engine cover.
(7) Raise vehicle on hoist.
(8) Drain engine oil.
(9) Remove transmission oil cooler lines from the oil pan mounting clip.
(10) Remove engine to transmission support braces.
(11) Remove starter motor.
(12) Remove transmission inspection cover.
Fig. 62
