RAM 2500 Van V8-5.9L VIN Z LDC (2000)
Fuel Pump Relay: Service and Repair
REMOVAL
Fig.16 Fuel Pump Relay Location
The fuel pump relay is located in the Fuse and Relay Block at the left end of the instrument panel (Fig. 16). Refer to the inside of cover (end cap) for
relay location.
1. Remove cover at left end of instrument panel.
2. Remove relay from Fuse and Relay Block.
3. Check condition of relay terminals and Fuse and Relay Block connector terminals for damage or corrosion. Repair if necessary bef6re installing
relay.
4. Check for pin height (pin height should be the same for all terminals within the Fuse and Relay Block connector). Repair if necessary before
installing relay.
INSTALLATION
1. Install relay to Fuse and Relay Block.
2. Install cover to instrument panel.