RAM 2500 Van V8-5.9L VIN Z LDC (2000)
Driver Side Airbag Trim Cover Retainers Remove/Install
4. Remove the upper and lower trim cover retainers from the airbag housing studs.
5. Remove the horn switch ground wire eyelet from the upper airbag housing stud.
Driver Side Airbag Trim Cover Remove/Install
6. Disengage the six trim cover locking blocks from the lip around the outside edge of the driver side airbag housing and remove the housing from
the cover.
INSTALLATION
WARNING:
-
USE EXTREME CARE TO PREVENT ANY FOREIGN MATERIAL FROM ENTERING THE DRIVER SIDE AIRBAG MODULE,
OR BECOMING ENTRAPPED BETWEEN THE AIRBAG CUSHION AND THE DRIVER SIDE AIRBAG TRIM COVER. FAILURE
