RAM 3500 Truck 2WD L6-359 5.9L DSL Turbo VIN D FI (1998)
Intake Manifold: Specifications
Manifold Cover Bolts ................................................................................................................................................................................ 24 Nm (18 ft. lbs.)
Air Inlet Housing Bolts ............................................................................................................................................................................. 24 Nm (18 ft. lbs.)
Air Intake Heater Power Supply Nuts ....................................................................................................................................................... 14 Nm (10 ft. lbs.)
Intercooler Outlet Duct Clamps ................................................................................................................................................................. 8 Nm (74 in. lbs.)
High Pressure Fuel Line Nuts ................................................................................................................................................................... 24 Nm (18 ft. lbs.)
EGR Nuts & Bolts ................................................................................................................................................................................. 24 Nm (212 in. lbs.)
NOTE: When tightening bolts at EGR valve end of tube, alternate between the upper and lower bolt to allow face of EGR valve to remain square
to the mounting flange on the EGR tube.
