RAM 3500 Truck 2WD L6-5.9L DSL Turbo VIN 6 (1999)
Push Rod: Service and Repair
Removal and Installation
ROCKER ARMS, CROSSHEADS, AND PUSH RODS
REMOVAL
1. Disconnect the battery negative cables.
Cylinder Head Cover-Removal/Installation
2. Remove cylinder head cover.
Rocker Arms And Pedestals-Removal/Installation
3. Remove the rocker arm/pedestal fasteners and remove rocker arm and pedestal from cylinder head. Mark the arms and pedestals so they can be
installed in their original position.