RAM 3500 Truck 2WD L6-5.9L DSL Turbo VIN 6 (1999)
Auxiliary Transmission Oil Cooler-Diesel Engine
5. Remove the charge air cooler-to-oil cooler bolt.
6. Remove two mounting nuts.
7. Remove the oil cooler and line assembly towards the front of vehicle. Cooler must be rotated and tilted into position while removing.
INSTALLATION
1. Carefully position the oil cooler assembly to the vehicle.
2. Install two nuts and one bolt. Tighten to 11 Nm (95 inch lbs.) torque.
3. Connect the quick-connect fittings to the transmission cooler lines.
4. Install front bumper.
5. Start the engine and check all fittings for leaks.
6. Check the fluid level in the automatic transmission.
