RAM 3500 Truck 2WD L6-6.7L DSL Turbo (2010)
3. Secure the J-straps (1 and 5)
4. Position the armrest into the seat cavity and secure the upper hooks (2).
5. Seat the armrest fully into the seat cavity and install the screws (3) and nuts (4).
6. Tighten the screws and nuts to 28 Nm (21 ft. lbs.)
7. Secure the J-strap (1).
8. Install two new rear hog rings (2).
9. Secure the J-straps (2).