RAM 3500 Truck 2WD V10-8.0L VIN W HDC (2000)
Radio/Stereo Noise Filter: Service and Repair
Radio Noise Suppression Components Replacement
WARNING: ON VEHICLES EQUIPPED WITH AIRBAGS, REFER TO AIRBAGS AND SEAT BELTS/AIRBAGS BEFORE
ATTEMPTING ANY STEERING WHEEL, STEERING COLUMN, OR INSTRUMENT PANEL COMPONENT DIAGNOSIS OR SERVICE.
FAILURE TO TAKE THE PROPER PRECAUTIONS COULD RESULT IN ACCIDENTAL AIRBAG DEPLOYMENT AND POSSIBLE
PERSONAL INJURY.
REMOVAL
Cab-To-Bed Ground Strap
1. Raise and support the vehicle.
Cab-To-Bed Ground Strap Remove/Install
2. Remove the screw that secures the cab-to-bed ground strap eyelet to the front crossmember of the cargo bed.
3. Remove the screw that secures the cab-to-bed ground strap eyelet to the cab floor panel.
4. Remove the cab-to-bed ground strap from the vehicle.
Engine-To-Body Ground Straps
Engine-To-Body Ground Strap Remove/Install
1. Remove the screw that secures the engine-to-body ground strap eyelet to the dash panel.