RAM 3500 Truck 2WD V10-8.0L VIN W HDC (2000)
CAUTION: The cylinder head cover fasteners have a special plating. DO NOT use alternative fasteners.
5. Position the cylinder head cover onto the gasket. Install the stud bolts and hex head bolts in the proper positions (Fig. 39). Tighten the stud bolts
and the bolts to 16 Nm (144 in. lbs.) torque.
6. If removed, install the upper intake manifold.
7. Install closed crankcase ventilation system and evaporation control system onto the proper head cover. DO NOT switch the systems.
8. Connect the negative cable to the battery.
9. Start engine and check for leaks.