RAM 3500 Truck 2WD V10-8.0L VIN W MDC (1999)
Belt Routing-8.0L V-10 Engine-With A/C
Belt Routing-8.0L V-10 Engine-Without A/C
CAUTION: When installing the serpentine accessory drive belt, the belt must be routed correctly. If not, engine may overheat due to water pump
rotating in wrong direction. For correct belt routing. The correct belt with correct length must be used.
11. Position fan shroud and fan blade/viscous fan drive assembly to vehicle as a complete unit.
12. Install fan shroud to radiator. Tighten bolts to 6 Nm (50 inch lbs.) torque.
13. Install fan blade./viscous fan drive assembly to water pump shaft.
14. Fill cooling system.
15. Connect negative battery cable.
16. Start and warm the engine. Check for leaks.