RAM 3500 Truck 2WD V10-8.0L VIN W MDC (1999)
the screw to 2 Nm (17 in lbs).
4. Install and tighten the two screws that secure the multi-function switch to the steering column. Tighten the screws to 2 Nm (17 in lbs).
5. Install the lower fixed column shroud onto the steering column.
6. Install both the upper and lower shrouds onto the steering column.
7. If the vehicle is so equipped install the tilt lever onto the left side of the steering column.
8. Reconnect the battery negative cable.