RAM 3500 Truck 2WD V10-8.0L VIN W MDC (1999)
Fig. 48
Measurements are taken with pinion cups and pinion bearings installed in housing. Take measurements with a Pinion Gauge Set 6730 and Dial
Indicator C-3339.
1. Assemble Pinion Height Block 6739, Pinion Block 6738, and rear pinion bearing onto Screw 6741.
Fig. 49
2. Insert assembled height gauge components, rear bearing and screw into axle housing through pinion bearing cups.
3. Install front pinion bearing and Cone 6740 hand tight.