RAM 3500 Truck 2WD V8-5.7L (2008)
Drive Belt: Removal and Replacement
Accessory Drive Belt - Removal
5.7L ENGINE
ACCESSORY DRIVE BELT ROUTING - 5.7L
1. Remove the air intake tube between intake manifold and air filter assembly.
2. Insert a suitable square drive ratchet into the square hole on belt tensioner arm.
3. Release the belt tension by rotating the tensioner clockwise. Rotate belt tensioner until belt can be removed from pulleys.
4. Remove belt.
5. Gently release tensioner.
Accessory Drive Belt - Installation
5.7L ENGINE
