RAM 3500 Truck 2WD V8-5.7L (2008)
4. Remove the brake caliper, See: Brakes and Traction Control/Disc Brake System/Brake Caliper/Service and Repair/Removal and
Replacement/Disc Brake Caliper - Removal .
5. Remove the cotter pin (2) and the hub nut (1) from the axle shaft.
6. Remove the caliper adapter. See: Brakes and Traction Control/Disc Brake System/Brake Caliper/Service and Repair/Removal and
Replacement/Disc Brake Caliper Adapter - Removal .
7. Remove the disc brake rotor. See: Brakes and Traction Control/Disc Brake System/Brake Rotor/Disc/Service and Repair/Removal and
Replacement/Brake Rotor - Removal .
8. Disconnect the wheel speed sensor wire.
9. Remove the hub/bearing 4 mounting bolts and remove the hub/bearing.
4500 & 5500 - Link/Coil
4500 & 5500
1. Raise and support the vehicle.
2. Remove the wheel and tire assembly.
3. Remove the brake caliper, See: Brakes and Traction Control/Disc Brake System/Brake Caliper/Service and Repair/Removal and
Replacement/Disc Brake Caliper - Removal .
4. Remove the caliper adapter. See: Brakes and Traction Control/Disc Brake System/Brake Caliper/Service and Repair/Removal and
Replacement/Disc Brake Caliper Adapter - Removal .
5. Remove the hub extension (2) and disc brake rotor (1) See: Brakes and Traction Control/Disc Brake System/Brake Rotor/Disc/Service and
Repair/Removal and Replacement/Brake Rotor - Removal .
6. Remove the axle shaft nut (3) from the axle shaft.
7. Disconnect the wheel speed sensor wire and remove the wheel speed sensor bolt (1) from the hub/bearing then remove the sensor (2).