RAM 3500 Truck 2WD V8-5.7L (2008)
Fuel Injector: Service and Repair
Fuel Injector - Installation
3.7/ 4.7/ 5.7L
1. Install fuel injector(s) into fuel rail assembly and install retaining clip(s).
2. If same injector(s) is being reinstalled, install new O-ring(s).
3. Apply a small amount of clean engine oil to each injector O-ring. This will aid in installation.
4. Install fuel rail. See: Fuel Rail/Service and Repair/Fuel Rail - Installation
5. Start engine and check for fuel leaks.