RAM 3500 Truck 2WD V8-5.7L (2008)
Seat Heater Switch: Service and Repair
Heated Seat Switch - Installation
INSTALLATION
1. Align the tabs of the switch/module to the instrument panel center bezel and gently push together until the tabs are securely in place.
2. Connect the switch/module electrical connectors.
3. Install the instrument panel center bezel, See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Instrument Panel Center Bezel - Installation .
4. Connect the battery negative cable.
5. Verify heated seat system operation.