RAM 3500 Truck 2WD V8-5.7L (2008)
Battery Tray: Service and Repair
Battery Retainer - Installation
INSTALLATION
1. Clean and inspect the battery hold down bracket (5) and bolt (6) See: Service and Repair/Procedures/Battery Cleaning and Inspection .
2. Position the battery hold down bracket in the battery tray.
CAUTION: Be certain that the hold down bracket is properly positioned in the battery tray before tightening the hold down bolt or
damage to the battery and tray may result.
3. Install and tighten the battery hold down retaining bolt.