RAM 3500 Truck 2WD V8-5.7L (2008)
Overdrive Solenoid: Service and Repair
545RFE Automatic Transmission
Removal
REMOVAL
NOTE: If the Transmission Solenoid/TRS Assembly is being replaced, the Quick Learn Procedure must be performed. See: Transmission
Control Systems/Testing and Inspection/Programming and Relearning/Transmission Control Module/TCM Quick Learn
1. Remove the valve body from the transmission. See: Valve Body/Service and Repair/Removal and Replacement/545RFE Automatic
Transmission/Removal
2. Remove the bolts (1) holding the transmission solenoid/TRS assembly onto the valve body.
3. Separate the transmission solenoid/TRS assembly from the valve body.
Installation
INSTALLATION