RAM 3500 Truck 2WD V8-5.7L (2008)
Power Window Motor: Service and Repair
Installation
INSTALLATION
1. Install the power motor to the regulator with the 3 screws (1).
2. Connect the electrical connector to the power motor.
3. Install the 2 mounting bolts (1).
4. Install the rear cab back panel See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/Rear Cab Back Panel
Trim/Installation .
5. Install the rear seats See: Body and Frame/Seats/Service and Repair/Seat - Installation .
6. Connect the battery negative cable.