RAM 3500 Truck 2WD V8-5.7L VIN D (2003)
Rear Door Striker: Adjustments
ADJUSTMENTS
1. Using a grease pencil or equivalent, mark the location of the door latch striker (1) on the C-pillar (2) to aid in adjustment.
2. Loosen the two bolts (3) that secure the door latch striker to the C-pillar.
3. To adjust the rear gap and flush measurement, change the position of the door latch striker and then tighten the two bolts to 28 N.m (21 ft.lbs.).
4. Verify correct door and latch position.