RAM 3500 Truck 2WD V8-5.7L VIN D (2003)
Starter Relay: Description and Operation
STARTER MOTOR RELAY
The starter relay is an electromechanical device that switches battery current to the pull-in coil of the starter solenoid when ignition switch is turned to
Start position. The starter relay is located in the Power Distribution Center (PDC) in the engine compartment. See PDC cover for relay identification
and location.
The starter relay is a International Standards Organization (ISO) relay. Relays conforming to ISO specifications have common physical dimensions,
current capacities, terminal patterns, and terminal functions.
The starter relay cannot be repaired or adjusted. If faulty or damaged, it must be replaced.
The ISO relay consists of an electromagnetic coil, a resistor or diode, and three (two fixed and one movable) electrical contacts. The movable
(common feed) relay contact is held against one of the fixed contacts (normally closed) by spring pressure. When electromagnetic coil is energized, it
draws the movable contact away from normally closed fixed contact, and holds it against the other (normally open) fixed contact.
When electromagnetic coil is de-energized, spring pressure returns movable contact to normally closed position. The resistor or diode is connected in
parallel with electromagnetic coil within relay, and helps to dissipate voltage spikes produced when coil is de-energized.
