RAM 3500 Truck 2WD V8-5.9L VIN 5 HDC (2000)
Valve Spring: Service and Repair
Additional Information
Refer to Engine Service and Repair for "Standard Service Procedures", "Disassembly and Assembly of Subassemblies" and "Cleaning and Inspection"
information. See: Service and Repair/Procedures
"Standard Service Procedures" typically covers service procedures, machining, fitting necessary as part of engine overhaul:
-
Cylinder Block and Bore
-
Connecting Rod and Bearings - Fitting
-
Crankshaft and Bearings - Fitting
-
Valve train components (Valves, Seats, Springs, Seats, Rockers, etc)
-
Engine Oil - Checking and Changing
-
Pistons and Rings - Fitting
"Disassembly and Assembly of Subassemblies" typically covers service of the following components:
-
Cylinder Head
-
Cylinder Block
-
Hydraulic Tappets (if equipped)
-
Oil Pump
-
Valve Service (See also: Valve, Intake/Exhaust)
"Cleaning and Inspection" typically covers service of the following components:
-
Cylinder Head
-
Cylinder Block
-
Camshaft and Journals
-
Crankshaft and Journals
-
Intake and Exhaust Manifolds
-
Valve Train Components (Valves, Seats, Springs, Seats, Rockers, etc)
If an internal engine component does not have a separate service procedure, the manufacturer did not provide one. Please refer to Engine Service and
Repair for available service procedures. See: Service and Repair/Procedures