RAM 3500 Truck 2WD V8-5.9L VIN 5 HDC (2000)
Fig. 39
6. Install the flange gaskets. Ensure that the vertical port alignment tab is resting on the deck face of the block. Also the horizontal alignment tabs
must be in position with the mating cylinder head gasket tabs (Fig. 39). The words MANIFOLD SIDE should be visible on the center of each
flange gasket.
7. Carefully lower intake manifold into position on the cylinder block and cylinder heads. Use the alignment dowels in the cross-over gaskets to
position the intake manifold. After intake manifold is in place, inspect to make sure seals are in place.
Part 1 Of 2
