RAM 3500 Truck 2WD V8-5.9L VIN 5 HDC (2000)
4. Remove the clamp nuts .
5. Disconnect the exhaust pipe from the support hangers on the 5.9L (Heavy Duty) and the 8.0L engines.
6. Remove the exhaust pipe.
INSTALLATION
1. Connect the exhaust pipe support hangers on the 5.9L (Heavy Duty) and the 8.0L engine.
2. Position the exhaust pipe for proper clearance with the frame and underbody parts. A minimum clearance of 25.4 mm (1.0 in.) is required.
3. Position the exhaust pipe to manifold. Install the bolts, retainers and nuts. Tighten the nuts to 34 Nm (25 ft. lbs.) torque.
4. Tighten the clamp nuts to 43 Nm (32 ft. lbs.) torque.
5. Lower the vehicle.
6. Start the engine and inspect for exhaust leaks and exhaust system contact with the body panels. Adjust the alignment, if needed.