RAM 3500 Truck 2WD V8-5.9L VIN Z LDC (1999)
Hub/Bearing Mounting Bolts
7. Remove hub/bearing mounting bolts from inboard side of steering knuckle.
Rotor Hub And Unit Wheel Bearing Assembly
8. Remove rotor hub/bearing assembly, brake shield and spacer from the steering knuckle.
Rotor Hub/Bearing Removal
NOTE: If rotor hub assembly will not come out of the knuckle, use Puller C-844 with extra Puller Leg C-884-1 to remove the remove the
assembly.