RAM 3500 Truck 4WD L6-5.9L DSL Turbo VIN C (2002)
Front Door Exterior Handle: Service and Repair
EXTERIOR HANDLE
REMOVAL
1. Remove the door glass.
Fig. 3
2. Disconnect the lock switch electrical connector, if equipped. (Fig. 3)
3. Disconnect the actuator rods at the handle.
4. Remove the nuts and remove the handle.
INSTALLATION
1. Install the exterior handle and install the nuts.
2. Connect the actuator rods at the handle.
3. Connect the lock switch electrical connector, if equipped.
4. Install the door glass.