RAM 3500 Truck 4WD L6-6.7L DSL Turbo VIN A (2007)
Antenna Cable: Service and Repair
Cable-Satellite Antenna
Removal
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Lower the rear portion of the headliner as necessary to access the underside of the satellite antenna (2).
3. Remove the B-pillar upper trim panel.
4. Remove the B-pillar lower trim panel.
5. Move carpet to access cable (1).
6. Disconnect each end of the cable.
Installation
INSTALLATION
1. Connect each end of the cable (1).
2. Place carpet into position.
3. Install the B-pillar lower trim panel.
4. Install the B-pillar upper trim panel Remove the C-pillar upper trim panel.