RAM 3500 Truck 4WD L6-6.7L DSL Turbo VIN A (2007)
Keyless Starting System: Testing and Inspection
DIAGNOSIS AND TESTING - REMOTE STARTING SYSTEM
Before attempting to diagnose a problem with the remote starting system, first be sure the starter motor and starter solenoid are working properly. The
starter should operate with the use of the standard ignition key in the ignition switch. Any starter or solenoid problems must be repaired first.
Also be sure the engine will easily start and run with the use of the standard ignition key in the ignition switch. Any engine running, idling or driveability
problems must be repaired first.
Also note that the remote starting system will automatically be cancelled if any of the following occur:
-
If the engine stalls or RPM exceeds 2500.
-
Any engine warning lamps come on.
-
The hood is opened.
-
The hazard switch is pressed.
-
The transmission is moved out of P (Park).
If all of the previous items checked OK, and the remote starting system will not operate, refer to Starting System diagnostics for further information.
